Premium Computer Bluetooth Speaker — Wireless Audio from MistAirHome Factory. Custom & Gift Options.
Customer Service Hotline:
+8613261677119
Premium Computer Bluetooth Speaker — Wireless Audio from MistAirHome Factory. Custom & Gift Options.+8613261677119
TL;DR - The Mistairhome WL-WD05V (PLUS) atomises neat essential oil at 0.18 mL per hour at the top intensity step, covers 12 sq m (129 sq ft) ceiling height 2.6 m and holds 19 mL giving 1267 hours (about 53 days) of scheduled running per fill; the pack is 2200 mAh lithium polymer giving 29.6 hours per full charge and recharging in 2.1 hours from empty; the cycle is 15 s atomising, 165 s pause, both adjustable; it measures 25.8 dB at 1 m in operation, draws 1.5 W while atomising, charges from USB-C 5V/1A with a 12 V and 24 V vehicle adapter in the box, weighs 204 g, and ships documented to CE / RoHS / FCC standards for import into Vietnam. MOQ is 200 units per SKU with a 25-35 days lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Waterless Fragrance Diffuser for Travel category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common atomising family, a common cell supplier and a common bottle and seal line, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
Full specification of WL-WD05V-PLUS:
| Atomising method | Piezo micro-mesh atomiser fed by a capillary wick |
| Atomisation rate | 0.18 mL per hour at the top intensity step |
| Oil reservoir | 19 mL |
| Diffusion time per fill | 1267 hours (about 53 days) of scheduled running per fill |
| Coverage area | 12 sq m (129 sq ft) ceiling height 2.6 m |
| Interval cycle | 15 s atomising, 165 s pause, both adjustable |
| Duty cycle | 8.3 percent of elapsed time |
| Noise at 1 m | 25.8 dB at 1 m |
| Battery pack | 2200 mAh lithium polymer |
| Run time | Up to 29.6 hours per full charge |
| Charge time | 2.1 hours from empty |
| Charge input | USB-C 5V/1A with a 12 V and 24 V vehicle adapter in the box |
| Rated power during atomising | 1.5 W |
| Control interface | Single button, three intensity steps, ignition sensing when wired to a fused feed |
| Bottle material | PETG with a silicone valve, sealed for a moving vehicle |
| Oil compatibility | 1 cSt to 60 cSt; thick resins starve the capillary and are not supported |
| Night light | Blue status dot behind the outlet grille |
| Dimensions | 7.0 x 7.0 x 11.6 cm |
| Weight | 204 g |
| Warranty | 12 months |
Shipping configuration: Plus build, + hard carry case + three-oil starter set + gift box + cleaning pipette. Master carton holds 36 units. Stated lead time is 25-35 days from order confirmation and deposit. Cores, seals and oils are repeat line items and are ordered separately from the appliance.
Buyers in Vietnam are not buying a nicer smell so much as buying consistency: a reed diffuser starts strong and fades, whereas a nebulised neat oil holds its strength until the bottle is empty. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into hospitality and clinic supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
Returns in the Waterless Fragrance Diffuser for Travel category cluster around two causes: oil viscosity outside the published range, and units placed in mechanically ventilated rooms where a corridor-mounted machine cannot reach. Both are answered at quotation stage rather than after arrival. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the output rate, the cycle and the supported viscosity side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Vietnam through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and battery files listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category.
Three engineering decisions separate this platform from the commodity end of the category. The first is the atomising method itself. A nebulising unit draws oil up a narrow tube and breaks it into droplets with a stream of air or with a vibrating mesh, with no water and no heat in the path. That matters because heat changes what an oil releases, and water changes how strong it reads, so neither belongs in a unit sold on delivering the oil as the grower intended.
The second is how output is stated. We quote millilitres per hour, not adjectives. A buyer can take that number, divide it into the bottle capacity, and know how long the bottle lasts before ordering a single unit. We also publish the interval cycle, because almost every professional installation runs a burst-and-pause programme rather than continuous diffusion: the pump draws rated power only while atomising, and roughly four-tenths of a watt less than that while waiting, which is why the battery figure on the specification sheet is far larger than the arithmetic of capacity divided by rated power would suggest.
The third is acoustics. In a nebulising unit the dominant noise source is the pump, not the airflow, and it is tonal, which is the kind of noise people notice in a quiet room. Two answers exist: isolate the pump from the housing so the case does not act as a sounding board, or remove the pump from the path and drive a piezo mesh instead, which is what the quietest models in this range do. This is why the quietest model is not the weakest one, and why the decibel figure deserves as much attention as the output rate.
Every production batch is sampled for four things before release: output rate against the declared figure by weighed run, decibel reading at one metre in a semi-anechoic corner, pack capacity against the cell specification by discharge test, and seal compatibility by a soak test with a citrus-terpene blend, since that combination is what hazes cheap plastics. Units falling outside tolerance are pulled before packing rather than after arrival, because a container of marginal units is a far more expensive problem at the destination than at the factory.
Operating requirement: Any water tank in this air becomes a cleaning job within weeks, whatever the unit cost.
How the WL-WD05V answers it: Nothing is added to the room's humidity, there is no tank to scrub, and there is no mineral deposit on nearby furniture. The figures quoted in this scenario are drawn from the same specification set shown above, so the two cannot disagree.
Deployment: Consulting rooms and waiting area of a dermatology clinic on Clifton
Timing: 2025 April to June, pre-monsoon heat with high humidity off the Arabian Sea
Humidity and salt-laden air make every damp surface in this clinic a maintenance problem, and the previous water-based unit had left mineral deposits on a lacquered cabinet within a season. Three WL-WD02Q units replaced it. The deposit rather than the smell was the deciding argument, and the clinic has since specified the same change in the adjoining rooms, which is how a single installation becomes a standing specification in this market.
Deployment: Osteopathy practice occupying two rooms of a Georgian terrace in Marylebone
Timing: 2025 October to February, heating season in a listed building where open flame is restricted
Listed-building insurance in this terrace forbids candles anywhere on the premises, which removed the obvious answer for a practice whose whole proposition is calm. Three WL-WD02Q units went into the treatment rooms and the entry. The practitioner's requirement was unusual and worth recording: no visible indicator light during a treatment, because a patient lying face down for forty minutes stares at whatever glows. That is why this model writes its status light below the threshold of perception in a dim room rather than merely dimming it.
Deployment: Veterinary practice in the eighth district, waiting room and two consult rooms
Timing: 2025 October to December, heating season with the practice's windows closed
Waiting rooms in veterinary practices carry fear from the animals and the smells that come with it, and cleaning between appointments does not remove either. Four WL-WD01C units were installed, one per consult room and two in the waiting area. The practice manager's measure was complaints from clients about the waiting room environment, which had run at roughly three a month and stopped entirely across the quarter. She also noted the practical point that a water-based unit in a room used by anxious animals would be knocked over, which the waterless machine cannot be said to mind.
Across these deployments the pattern is consistent. Buyers who specify from measurements rather than superlatives end up with fewer returns, and the three measurements that matter are output per hour, supported oil viscosity, and noise in a quiet room. Everything else, including how a unit looks in photographs, affects the first order only.
The same atomising family is specified into four quite different duties, and the differences are worth stating plainly because they decide which model a buyer should stock rather than which one photographs best.
| Scenario | Setting | Operating requirement |
| SC09-CORDLESS | Pop-up retail stands and exhibition booths with no socket nearby | Cabling decides placement, and a visible cable loses the whole point of the display. |
| SC02-BEDROOM | Master bedroom running overnight while the room is dark | Anything audible or glowing in a dark room becomes the reason a unit gets unplugged. |
| SC05-CLINIC | Dental and aesthetic clinic waiting areas with people already anxious | Whatever goes into the air has to be declarable, which rules out heated or diluted systems. |
| SC08-YOGA | Breathwork and meditation practice rooms booked in long sessions | Deep inhalation means the participants take in whatever is airborne at full volume. |
Two consequences follow for a distributor. First, a range built around one atomising family and three SKU builds covers more duty than a range built around three unrelated models, because the bottle, seal and core line is shared. Second, the consumable is where the margin sits after the first season: cores, seals and oil repeat, while the appliance itself does not.
Working factory direct changes four things that a distributor notices. Specification is fixed at the bill of materials rather than at the catalogue, so a quoted output rate, coverage or decibel figure is the figure the container ships with, not a figure that drifts between batches. Documentation is issued per model code, which removes the generic family certificate problem that holds shipments at customs.
Third, the atomiser core supply is controlled. A nebulising appliance stands or falls on consistency between units, and cores bought per batch from whichever factory quoted lowest is the single most common cause of a second shipment performing differently from the first. We build the core, we publish its nozzle geometry, and the output figure on the specification table is a weighed-run figure rather than a nominal one.
Fourth, changes are possible without a new supplier search. Housing colour, panel insert, packaging artwork, manual language and the accessory kit are all handled inside the existing tooling for most models in this range. Buyers who start with a standard build and move to private label in the second season do not restart the engineering conversation, and they do not have to re-qualify the oil compatibility question either.
None of this removes the need for the buyer to test. We send samples on the same production specification as the bulk order, and we would rather a buyer measure a sample and find a limitation early than place a container against a claim they have not checked.
Documentation is issued against the model code on the order. The standard set covers CE / RoHS / FCC / UKCA / REACH / EMC / PSE / KC / RCM / UN38.3 / IEC 62133, with the battery reports included because any rechargeable appliance cannot be booked onto a vessel or an aircraft without them. Where a buyer supplies its own oil, the material declaration covers every part in the oil path, which is what the buyer's own fragrance documentation usually asks for.
Three points matter for import planning into Vietnam. The safety report is issued to IEC 60335-1 as a household appliance, not as a piece of electronics, because that is how the product is classified at customs in most markets. The radio documentation applies only to models with a schedule or a connectivity section and is issued separately, so a distributor stocking only the manual models does not carry that requirement. And the battery file belongs to the cell part number, so it stays valid across colour and packaging revisions but needs re-issuing if the cell specification itself changes, which we do not do silently.
Transport is worth planning rather than discovering. Most essential oils are flammable liquids for carriage purposes, so a unit shipped with oil inside becomes a dangerous-goods booking. We therefore ship units with an empty bottle by default, which keeps the appliance on ordinary freight terms and leaves the buyer free to source oil locally, usually cheaper and faster.
The landed cost model for this category has three lines, and only the first is obvious. The appliance is line one. The consumable line is line two - cores, seals and oil - and unlike most small appliances it is the line that recurs, which is the commercial reason this category is worth importing rather than merely trading. Freight is line three, and it behaves better here than in most small-appliance categories: these units are compact, so a container weights out or cubes out later than a comparable fan or humidifier would.
Consumable planning is where first-season distributors most often get it wrong. Ordering nothing beyond the appliance leaves the installed base without refills precisely when the habit has formed, and the buyer then fills the gap with another supplier's bottle, which may well have a viscosity outside the published range. We suggest taking oil and cores on the first order, then scheduling a reorder against the installed base.
The unit specified on this page ships with plus build, + hard carry case + three-oil starter set + gift box + cleaning pipette. Master carton quantity is 36 units, which is the figure that sets the freight quote. Buyers consolidating several models into one container should send the model mix before quoting, because carton quantities differ between chassis and the container plan changes accordingly.
On pricing: we quote FOB Shenzhen or EXW Longgang against a stated quantity and SKU mix. We do not quote a single unit price that silently assumes the highest-volume configuration, and we state the validity window on the proforma rather than leaving it open.
Question 1: What is the minimum order quantity for a first waterless diffuser order?
Answer: MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for each SKU suffix.
Question 2: How is coverage area stated, and how should a buyer interpret it?
Answer: We quote area against a stated ceiling height, and against a still room, which is the only honest basis. We also say plainly that mechanical ventilation changes it: a room with a supply diffuser in the ceiling loses nebulised particles into the return faster than a still room does, so a buyer should plan one unit per room rather than one per corridor. Nothing exotic is needed to check the figure; a buyer can run the unit in the target room and judge strength at the far corner after twenty minutes.
Question 3: Does the unit ship with essential oil inside?
Answer: Normally no, and deliberately so. Most essential oils are flammable liquids for transport purposes, so shipping oil inside the unit turns the consignment into a dangerous-goods booking with higher freight cost and more paperwork. We ship with an empty bottle and recommend that importers source or blend oil in their own market, which is also faster and cheaper than moving liquid internationally. Where a buyer specifically wants a bundled starter set, we quote it separately so the freight difference is visible rather than buried.
Question 4: Which compliance files ship with a waterless diffuser order?
Answer: The standard file set is the CE technical file, RoHS and REACH declarations, an EMC test report, the IEC 60335-1 household appliance safety report, and for battery builds a UN38.3 test report with an IEC 62133 cell report and MSDS. For North America we add FCC documentation for the digital control models. For Japan and Korea we issue against PSE and KC, and for Australia and New Zealand against RCM, in each case against the model code on the order rather than a generic family certificate. Where a buyer supplies its own oil we can provide an IFRA-aligned statement of the materials in the oil path, which is what their own fragrance documentation usually asks for.
Question 5: Can we sell these under our own brand, with our own oil?
Answer: Yes. Private label covers housing colour, logo placement, retail artwork, manual language and the accessory kit, and most of it sits inside existing tooling for this range. The oil side is separate and usually better handled in the buyer's own market: we publish the viscosity range and the material declaration, and the buyer's blender works to those. Buyers entering the category often assume the appliance and the oil must come from one supplier, and they do not; separating them usually lowers landed cost and shortens the registration path considerably.
Question 6: Will thick oils such as vetiver or sandalwood work?
Answer: Up to a limit, and the limit is published per model rather than hidden. Thin citrus and floral oils atomise readily in every model in this range. Very viscous materials - vetiver, sandalwood, some absolutes - need a larger nozzle or thinning, and the fine-mesh models are the wrong choice for them. This is the most common compatibility complaint in the category after market, and it is a specification problem rather than a defect, so we list the supported range by model and ask buyers to match the oil to the unit rather than the other way round.
Question 7: What warranty and spares support do you provide?
Answer: Twelve to twenty-four months depending on the model, against manufacturing defect. Atomiser cores, seals, bottle assemblies and batteries are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. The core is a wearing part with a service life measured in hundreds of hours rather than years, so we suggest first-time buyers take one spare core per twenty units; a distributor who cannot supply a replacement loses the oil reorder along with the goodwill.
Question 8: How long does sampling and first production take?
Answer: Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 15 to 35 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Battery shipments add a documentation step at booking, which we handle but which needs a few extra days on the freight side.
Where an answer above depends on the buyer's market, the oil they intend to run or the ventilation in the target room, the honest answer is that it depends, and we would rather say so than publish a figure the buyer cannot reproduce. Buyers comparing quotes should check whether a rival's coverage area states a ceiling height and whether the output figure is given per hour.
Four kinds of partner do well with this range. Importers with existing small-appliance or home-fragrance distribution take container volumes and service the retail channel. Regional distributors buy mixed pallets and cover hospitality, clinic and wellness accounts, which is where the repeat consumable order is generated.
Online and cross-border sellers take mixed SKUs and work the long tail, where a specific phrasing such as an in-car or improved-sleep listing converts better than a generic diffuser listing. And fragrance houses and oil blenders run private label, usually entering with one model and expanding once their own oil sales justify it.
What all four need from the factory is the same thing: a specification that does not drift, documentation that matches the model code, and an atomiser core that stays on the same nozzle geometry after the first season. That is the whole of the offer, and it is worth more than a lower unit price that comes with none of it.
Wanlin is a manufacturer and export supplier of waterless aroma diffuser appliances, not a trading intermediary, and we are open to working with local partners, distributors and export traders in Vietnam on any of the four routes above.
A first order is structured in three steps rather than one leap. Step one is sample evaluation: one or two units on the specification the buyer intends to import, shipped in 5 to 7 working days, measured by the buyer against whatever standard they intend to be held to by their own customers. For this category that means weighing the bottle before and after a timed run, and checking the oil they plan to sell really is inside the published viscosity range.
Step two is a mixed trial order, typically 200 to 600 units across two or three models, which tests the channel without committing to a full container on unproven models. Step three is scheduled container shipments with a locked pricing window and a consumable plan attached.
Customisation enters at whichever step the buyer wants it. Colour and packaging can be done at trial quantity; manual translation and accessory kit changes are usually worth doing only once volume justifies the setup. We state the setup cost and the unit cost separately so the buyer can see what the customisation actually costs at their quantity.
The WL-WD05V (PLUS) is one configuration out of 24 in this range. The right way to evaluate it is to order a sample on this specification and measure it: output rate by a weighed run, noise at one metre in a quiet room, and bottle life against the stated cycle with the oil the buyer actually intends to sell.
We publish figures that a buyer can reproduce, we state the ceiling height behind the coverage number, and we say plainly where the honest answer depends on the room or the oil. That is a narrower claim than some competitors make, and it is the one we can stand behind at sample stage.
Export enquiries are welcome from distributors, brand owners, fragrance houses, cross-border sellers and export traders. Samples, specification sheets and the certification and battery files are available on request.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 21, 2026
Data sources: in-house factory testing + atomiser and cell specifications + certification and battery files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
